450-550-650-750 ET SILENT COMPRESSOR...
![](/img/m/114.jpg)
Coltri 450-550-650-750 ETS Silent Scuba Diving High Pressure Compressor Threephasic: The SILENT model represents excellence in soundproofing. It has been designed to meet the needs of very intensive uses and when large filling capacities are required. Equipped with 4 front filling connections for high pressure hoses (from 232 to 420 bar), a control panel and an electrical display. They are equipped with a three-phase electric motor and powerful pumping units (450 550 650 750 depending on the specific model).Â
AD300 OXYGEN MONITORING
![](/img/m/580.jpg)
450-550-650-750 ET OPEN COMPRESSOR (Threephasic)
![](/img/m/114.jpg)
Coltri 450-550-650-750 ET Open threephasic Commercial Diving High Pressure Compressor: Open meets professional needs that require large charging capacities in hot, poorly ventilated or tropical countries. It is equipped with 4 front filling connections for high pressure hoses, an intuitive control panel and an electric motor. The pumping unit, chosen from the 4 most powerful, is exposed in the rear part of the structure to ensure a better cooling cycle. For longer filter life, the Tornado high pressure dryer is recommended
LP 250 NITROX ROTARY
![](/img/m/114.jpg)
Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.
3 L STEEL OXYGEN CYLINDER W/ VALVE
![](/img/m/34.jpg)
3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO
MD300 OXYGEN MONITOR
![](/img/m/580.jpg)
LP 300 NITROX ROTARY
![](/img/m/114.jpg)
The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.
3 L STEEL DILUENT CYLINDER W/ VALVE
![](/img/m/34.jpg)
3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO
R17 SENSOR FOR VN202 OXYGEN ANALYZER
![](/img/m/580.jpg)
LP 600 NITROX ROTARY
![](/img/m/114.jpg)
At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.
2 L STEEL OXYGEN CYLINDER W/ VALVE
![](/img/m/34.jpg)
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap
2 L STEEL OXYGEN CYLINDER W/ M26 VALVE
![](/img/m/34.jpg)
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap
FILLING PANEL FOR COMPRESSOR
![](/img/m/114.jpg)
It has two gauges (one for each pressure) for controlling the load pressure. With its internal pressure regulator, you have the ability to offer dual pressure load (2 outputs and 2 outputs 300 bar to 225 bar).
R22 VAN OXYGEN SENSOR FOR DIVESOFT
![](/img/m/580.jpg)
2 L STEEL DILUENT CYLINDER W/ VALVE
![](/img/m/34.jpg)
2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap
FILLING PANEL FOR COMPRESSOR WITH CAMS
![](/img/m/114.jpg)
Panel loading with 4 exits for connection to any compressor Coltri range. It has manometer to control the load pressure. Combined with a bank of air, it can be an ideal place for a bottle loading station configuration.
R22AT OXYGEN SENSOR FOR ATA
![](/img/m/580.jpg)
R22 DEM OXYGEN SENSOR FOR ANALOX OE II (OLD)
![](/img/m/580.jpg)
1.5 L ALUMINIUM ARGON CYLINDER
![](/img/m/34.jpg)
MOLECULAR SIEVE
![](/img/m/114.jpg)
1.0 L ALUMINIUM ARGON CYLINDER
![](/img/m/34.jpg)