IW24 HYDRAULIC IMPACT WRENCH

Stanley hydraulic impact wrenches for underwater applications are designed to meet the most stringent requirements for underwater screwing. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The weight ratio -The power of this equipment has no comparison with an impact wrench of this type on the market.

SUBMERSIBLE PUMP SM21

Las bombas hidráulicas Stanley exemplifies the potencia pura of las herramientas hidráulicas. Nuestra bomba SM50 descarga nada menos que 500 galones por minuto (1890 lpm) y su tamaño pequeño the permite adjustarse a una caja de 11 pulgadas de profundidad por 10 pulgadas cuadradas (26.7 cm x 25.4 cm).

SUBMERSIBLE PUMP SM50

Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump discharges no less than 500 gallons per minute (1890 lpm) and its small size allows it to fit into a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).

WASTE PUMP TP03

The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in). The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.

WASTE PUMP TP08

The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in). The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.