USBL EASYTRAK
Easytrak is a compact Ultra Short Baseline (USBL) system designed for the efficient tracking of underwater targets such as divers, ROVs, AUVs and tow fish.
Easytrak is a compact Ultra Short Baseline (USBL) system designed for the efficient tracking of underwater targets such as divers, ROVs, AUVs and tow fish.
With a phenomenal overall breaking strength of 1000kg, the All New Northern Diver R-Vest has surpassed the requirements set by the ‘Association of Diving Contractors International’ Standards.
The X-Vision CCTV System by Casco Antiguo is a compact HD video system, ideal for very commercial diving operation, it is made for the toughest and most demanding jobs. It allows to monitor and record up to 4 divers simultaneously. The brightness of the SHARK LIGHT can be adjusted on demand from the surface X-Vision Panel.
The SBQ CONTROL II panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
The “vest style” safety harness that distributes the load over the whole body. This harness supports the fully equipped diver safely and comfortably. With stainless steel straps and D-rings with high load capacity and bottom rings for tools or hookah closures. With 6 pockets to each accommodate 8 pounds of lead, and the ability to quickly release them.
The SBQ CONTROL III panel is a portable power system with control and monitoring for diving operations with surface air supply for three divers. The system was designed to supply air from the surface and control the depth of the divers.
The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 º. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.
The SBQ CONTROL I panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
Compensation harness-vest Mark IV Jump Jucket that allows the rapid recovery of the injured person thanks to the integrated lifting harness and supplying gas if necessary.
KMACS 5 NO COMMUNICATIONSThe Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations.
The KMACS-5 is a lightweight, portable air supply, depth control and communications panel for two divers.
Divex MK2 work boots serve to improve diver safety and the life of all types of wetsuits, even in the most difficult conditions, protecting the lower extremities.
Synergy HSE two-diver inshore panels are built specifically for non-imca shore diving operations. Each diver has 1 independent HP supply line and 1 independent LP supply line per diver. Inlet and outlet fittings can be provided from the side, top or bottom of the panel. We can supply as a portable panel or mounted on a frame for permanent installation.