Commercial Diving Gear & Equipments

PROTON METAL DETECTOR

The definitive detector for iron and steel targets

SAR1 UNDERWATER METAL DETECTOR

Snareless metal detector, no external wires or cables.

For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.

CT1 CABLE TRACKER

The ideal tool for tracking power and communication cables

LARGE FLOW RATE REDUCER 02 HVR

The Broco Oxygen Regulator is a two-stage unit with a high continuous flow for underwater combustion. Broco's studies show that the efficiency of the cut depends more on the flow of oxygen than on its pressure.

BOAT TOWED METAL DETECTOR PULSE 10 - 12

An economical yet powerful boat towed metal detector for ferrous and non-ferrous metals

PVL CUTTING SYSTEM

Oxygen and propylene cutting system sub-system: Oxygen and propylene cutting system, clean cut without residue. Easy handling Robust 2 models: 55 degrees or 90 degrees

METAL DETECTOR PULSE 6X 8X

Pulse induction metal detector.

DIVE SCAN

DIVE-SCAN™ PROFESSIONAL SONAR SYSTEM

ROD CUT 9,5 X 480 mm (3/8") (50 Ud)

DPR-275 DIVER PINGER RECEIVER

This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.

CUTTER BR-22 PLUS

For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.

ATT-400 ACOUSTIC TARGET TRANSPONDER

The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.

ROD CUT 9,5 X 910 mm (3/8") (25 Ud)

ULB-350 LOW COST LOCATION BEACON

This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.

PRS275 PINGER RECEIVER SYSTEM

The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.