PANEL CONTROL II 2 DIVERS
The SBQ CONTROL II panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
WELDING CLAMP EH400
The Hydroweld EH400 underwater welding gun is used throughout industry. Among its advantages, it should be noted that they are economical, very light and resistant. They are distributed together with a cable of approximately 2 meters and 50 mm2 terminated by a male Dinze type connector
PANEL CONTROL III 3 DIVERS
The SBQ CONTROL III panel is a portable power system with control and monitoring for diving operations with surface air supply for three divers. The system was designed to supply air from the surface and control the depth of the divers.
BOAT TOWED METAL DETECTOR PULSE 10 - 12
An economical yet powerful boat towed metal detector for ferrous and non-ferrous metals
PANEL CONTROL SBQ I (2 Wires)
The SBQ CONTROL I panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
WELDING CLAMP BR-21
BR21 broco type compression welding system is designed with superior features. The BR-21 is lightweight, rugged, and designed to hold the electrode at the optimum angle to reduce diver fatigue.
DPR-275 DIVER PINGER RECEIVER
This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.
KMACS 5 NO COMMUNICATIONS
ATT-400 ACOUSTIC TARGET TRANSPONDER
The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.
PANEL GAS KMACS5
The KMACS-5 is a lightweight, portable air supply, depth control and communications panel for two divers.
ULB-350 LOW COST LOCATION BEACON
This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.
PANEL HSE PARA 2 BUZOS (PORTÁTIL/MONTADO EN...
KMACS 5 NO COMMUNICATIONSThe Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations.
PRS275 PINGER RECEIVER SYSTEM
The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.
SRP 3 Buzos IMCA
The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.