Active filters
LATEST NEWS
Tds abadon 5 mm wetsuit, made of super elastic neoprene with sealed seams and much studied reinforcements in high wear areas. Larrge pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.
TDS Jet Fin MSP belongs to the tactical-military range, tested by different armies and special forces. Jet Fin type rubber fin "long" with traditional design, also available to technical and sport divers, as well as professional divers, looking for a powerful and immediate response fin. Made of 100% rubber, it offers a very high durability over time as well as resistance in the worst conditions.
Coltri 315 EM Ergo Commercial Diving High Pressure Compressor Monophasic: The ERGO model stands out for its robustness, portability and great efficiency. Equipped with three different pumping units (MCH 13, MCH 16, or MCH 18 depending on the specific model) and powered by three-phase electric motors. Each ERGO compressor has a monitoring system panel that includes an interstage pressure gauge, autostop with adjustable pressure switch, automatic condensate drain and a phase control for rotation direction.
The Svalbard undergarment from TDS has been made with the best current thermal protection material: Thinsulate. Lightweight and elastic, the Svalbard offers a very comfortable fit thanks to an elaborate pattern, as well as being the ideal complement to any dry suit.
Robust tds scissors in stainless steel, to act as a cutting element quickly and safely. With his microdentate sheet, it acts on most materials effectively. Indispensable in the technical diving, cave divind and for aquatic rescue teams
The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.
Coltri 315 SH Ergo Petrol Gasoline Scuba Diving High Pressure Compressor Gasoline: the Coltri ERGO PETROL Breathing Air Compressor is an excellent choice for those who need an easy to use, versatile and portable compressor. It is equipped with 2 front filling connections for high pressure hoses (from 232 to 330 bar), a Honda petrol engine and the robust 315 pumping unit. The ergonomic frame cools the equipment perfectly by means of its composite casing. The remote filling panel is available as an optional extra.
AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.
Thermodive Undersuit Shirt are designed to provide the thermal protection and comfort needed to dive with a dry neoprene suits Trilaminated dry suits serve as a thermal complement to thermal interiors of greater weight The shirt has clasps in the cuffs specially designed so the shirt can be worn without the sleeves bunching up and they do not interfere the cuffs sealing
KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.
Coltri 235 - 315 ETS Mark III Silent Commercial Diving High Prressure Compressor: MCH18 Coltri compressor model and MCH 18 Compact three-phase electrical Evo. Bottles for recharging at high pressure. High flow filling. Body fairing with acoustic damping. Electric motor. Automatic purges condensation. Filtering system for activated carbon.
Thermodive Undersuit Pants are designed to provide the thermal protection and comfort needed to dive with a dry neoprene suits Trilaminated dry suits serve as a thermal complement to thermal interiors of greater weight The trousers have clips at the end of the legs to prevent them from bunching up when the user inserts their legs into the dry suit and also has a drawstring in the waistband
Coltri 235 - 315 ETS Mark III Silent TPS Scuba Diving High Prressure Compressor: Ideal for intensive use in hot, poorly ventilated environments or in tropical countries. Designed with an improved cooling system and a filtering system with two Hyperfilters, these compressors are powered by an electric motor and equipped with four different pumping units, all in the TPS (Tropical Plus Superdry) version.
Robust and equipped with a reinforced sole, the Omaha Zero TDS Boot is designed for use with drysuits provided with a sock-shaped foot and has a whole series of technical characteristics allowing it to perform its function perfectly.
Coltri 345 - 380 ETS Mark III Silent TPS Scuba Diving High Prressure Compressor: Ideal for intensive use in hot, poorly ventilated environments or in tropical countries. Designed with an improved cooling system and a filtering system with two Hyperfilters, these compressors are powered by an electric motor and equipped with four different pumping units, all in the TPS (Tropical Plus Superdry) version.
Stainless steel spring for jet fin fins type . The adjusto to the fin is made by a stainless steel screw with security nut. Add strength, durability and safety to the fins
Coltri 235 - 315 - 330 ET Supersilent TPS ETS Commercial Diving High Pressure Compressor: Specially designed to minimize noise. It features an enhanced cooling and sound insulation system and an efficient filtering system with two Hyperfilters. Powered by an electric motor, it is equipped with four different pumping units, all in the TPS (Tropical Plus Superdry) version, and with an intuitive control panel. For longer filter life, the Tornado high pressure dryer is recommended.
Coltri 345 - 380 ET Supersilent TPS ETS Scuba Diving High Pressure Compressor: Specially designed to minimize noise. It features an enhanced cooling and sound insulation system and an efficient filtering system with two Hyperfilters. Powered by an electric motor, it is equipped with four different pumping units, all in the TPS (Tropical Plus Superdry) version, and with an intuitive control panel. For longer filter life, the Tornado high pressure dryer is recommended.
Coltri 450-550-650-750 ETS Silent Scuba Diving High Pressure Compressor Threephasic: The SILENT model represents excellence in soundproofing. It has been designed to meet the needs of very intensive uses and when large filling capacities are required. Equipped with 4 front filling connections for high pressure hoses (from 232 to 420 bar), a control panel and an electrical display. They are equipped with a three-phase electric motor and powerful pumping units (450 550 650 750 depending on the specific model).
Coltri 450-550-650-750 ET Open threephasic Commercial Diving High Pressure Compressor: Open meets professional needs that require large charging capacities in hot, poorly ventilated or tropical countries. It is equipped with 4 front filling connections for high pressure hoses, an intuitive control panel and an electric motor. The pumping unit, chosen from the 4 most powerful, is exposed in the rear part of the structure to ensure a better cooling cycle. For longer filter life, the Tornado high pressure dryer is recommended
Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.
The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.
At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.
It has two gauges (one for each pressure) for controlling the load pressure. With its internal pressure regulator, you have the ability to offer dual pressure load (2 outputs and 2 outputs 300 bar to 225 bar).
Cookie preferences
