SUPER RAPTOR MONO GAS HYDRAULIC PLANT

SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .

DUAL ELECTRIC RAPTOR HYDRAULIC PLANT

SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.

HD13 HYDRAULIC HAMMER DRILL

13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

DC18 DISC SAW DOA

The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

AS23 HYDRAULIC GRINDER DOA

AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.

KV19 BREAKER DOA

KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.

7SEVEN DPV

Suex 7Seven Scuba Diving DPV: From SUEX’s recreational line, 7Seven is the most accessible underwater scooter for beginner divers. This entry-level model can operate at depths of up to 80 metres, with a maximum speed of 60 m/min and an autonomy of up to 75 minutes at cruising speed. It is compatible with air transport, for a worldwide diving experience.

VR-T DPV

Recreational DPV with two-speed control and HI-GR compound propeller. The VR-T uses a Nimh battery that recharges in just 4.5 hours and offers 100 minutes of autonomy at cruising speed and 60 minutes at a maximum speed of 65 m/min. VR-T is suitable for air travel, allowing the diver to travel around the world without worrying about logistics.

VR-X DPV

Suex VR-X DPV Scooter: The VR-X DPV scooter uses a Li-ION battery with external charging system, offering a capacity of 512 Wh for long dives of up to 150 minutes at cruising speed and 100 minutes at a maximum speed of 65 m/min. Controlling both the motor and the battery with the Calypso app gives divers a unique experience down to a depth of 101 metres.

XJ-T DPV

Suex XJ-T DPV Scooter: Underwater scooter for technical/professional use with aluminium body. The XJ-T underwater scooter uses a Nimh battery that recharges in just 4.5 hours and offers 75 minutes of autonomy at cruising speed and 35 minutes at a top speed of 85 m/min. The XJ-T can be stored in the aircraft hold for easy transport to any location and in all conditions.

XJ-S DPV

Suex XJ-S DPV Scooter: Underwater scooter for technical/professional use with aluminium body. The XJ-S offers high capacity thanks to its Li-ION battery, which is monitored by a special indicator, the Calypso app and the Eron D-1, so the diver has full control over the 185 minutes of autonomy at cruising speed and 85 minutes at full speed (85 m/min) to reach a depth of 200 metres.

XK DPV

Suex XK DPV Scooter: Durable, high-performance DPV for the most demanding professionals. XK is the DPV for technical/professional use: it enables long-range and cave exploration thanks to its Li-ION battery that offers 330 minutes at cruising speed and 100 minutes at maximum speed (100 m/min). Depths of up to 200 metres can be reached with XK.

SINAPSI NOSE FOR SUEX DPV

Sinapsi Nose forSuex DPV: SINAPSI is a special nose for navigation that replaces the standard nose. It is equipped with sophisticated electronics to receive and process underwater navigation data acquired via DPV. The SINAPSI project has required years of increasingly sophisticated research, including many tests and trials to optimise the system using the most exciting, up-to-date technological solutions.

SPOOL BLUE 45 M

Inspired by technical diving and versatile enough to be used in a range of diving applications, the new LifeLine spool from Apeks features easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line for low light conditions and with a super tough leader and swivel as standard, the Lifeline comes in three sizes and colours and is complemented by a range of line markers and cookies.

ERON D-1 FOR SUEX DPV

Suex Eron D-1 Dshaboard for Suex Scooter DPV: Dashboard for monitoring and navigation for Suex DPV. Wireless DPV data reception. Can be mounted on DPV holder or worn on the wrist. One-touch function activation. Remaining autonomy in minutes at set speed. DPV battery state of charge. Instantaneous consumption. Water speed (available with Sinapsi nose). Distance travelled in water (available with Sinapsi nose)

SPOOL GREEN 30 M

Inspired by technical diving and versatile enough to be used in a range of diving applications, the new LifeLine spool from Apeks features easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line for low light conditions and with a super tough leader and swivel as standard, the Lifeline comes in three sizes and colours and is complemented by a range of line markers and cookies.

DS4 1st STAGE DIN

Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF

SPOOL VIOLET 15 M

Inspired by technical diving and versatile enough to be used in a range of diving applications, the new LifeLine spool from Apeks features easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line for low light conditions and with a super tough leader and swivel as standard, the Lifeline comes in three sizes and colours and is complemented by a range of line markers and cookies.