JET FIN TECH FIN

Extremely robust Jet Fin fin and powerful stroke. Includes stainless steel springs protected with neoprene. Intended for military, police and rescue units.

Wide and reinforced foot pocket.

Available colors, black, red, yellow, green, blue, pink, white and camo.

Sizes XS, SM, LXL, 2XL.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

BR67 UNDERWATER BREAKER/DRIVER (With C.E.)

The BR67 is a medium sized breaker in Stanley Hydraulic Tools line up of underwater paving breakers. The BR67is in the 70 lbs class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving.

BR45 HYDRAULIC BREAKER (With C.E.)

The BR45 is the smallest breaker in the Stanley Hydraulic Tool lineup of underwater breakers. The feathering on/off valve controls speed and allows easier initial tool placement. Standard 1" hex chuck and latch retainer. Painted hi‑visibility yellow.

SOLO SHIPBOARDING 25th DRYSUIT

Our most technologically advanced Dry Suit, the Shipboarding 25th dry suit has been designed in collaboration with Military Special Task Forces, with High Quality Materials and Special Tailoring Techniques. We consider the Solo Shipboarding 25th our best Trilaminate Dry Suit in terms of mobility, comfort, and overall resistance.

CH15 UNDERWATER CHIPPING HAMMER

The Stanley Submarine CH15 Breaker Hammer is a lightweight yet powerful alternative to pneumatic tools. Designed for medium and heavy duty jobs, due to its high power to weight ratio the CH15 becomes the ideal tool for scuba divers working in concrete.

SOLO EXPEDITION 25th DRYSUIT

A perfect combination of lightness, freedom of movement, mobility, and resistance. This is the DiveSystem's Solo Expedition Trilaminate Dry Suit.

CS11 UNDERWATER CHAIN SAW

The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.

SOLO POLLUCE 25th DRYSUIT

Full-top in extra high density neoprene foams, thickness 2 mm with Supratex outer lining and reinforced peds in Kevlar® on shoulders. Slacks in Ferguson trilaminate, with Poliestere outer lining and reinforced peds in Cordura 1000 on knees and buttocks

SOLO MILLITARY DRYSUIT

Meets the needs of technical diver who looks for independence and freedom of movement both inside and outside the water. The Solo Military is made with high quality materials: Trilaminate and, at areas of increased wear, 1000 denier.

GR29 UNDERWATER GRINDER CE W/COUPLERS

The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories

SOLO MG 25th DRYSUIT

Solo MG 25th Dry Suit is designed to combine the lightness of Nylon trilaminate with the independence guaranteed by the front entry zipper. Areas of increased wear are protected by Cordura® 1000 denier. The Solo MG 25th Dry Suit has been used by Michele Geraci during the "Solo-Dive" World Record (-212mt) and the "No-Limit" World Record attempt (-253mt).

SK58 UNDERWATER SINKER DRILL

The Stanley SK58 drill is a heavy duty drill, designed for underwater operations in concrete, rock and masonry drilling.The SK58 uses industry standard drilling steels and can drill up to 6m depth. The direct motor drive drives the rotation on the 1 "x 4 1/4" hex shank of the drill steel, the rotation It can be set between 0 and 300 RPM.

SPOOL BLUE 45 M

Inspired by technical diving and versatile enough to be used in a range of diving applications, the new LifeLine spool from Apeks features easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line for low light conditions and with a super tough leader and swivel as standard, the Lifeline comes in three sizes and colours and is complemented by a range of line markers and cookies.

SOLO N DRYSUIT

The advantages of technical Drysuit, such as the front zip and the bellows that guarantee freedom of movement, combined with HD Neoprene thermal insulation and superb abrasion resistance of Supratex®

SPOOL GREEN 30 M

Inspired by technical diving and versatile enough to be used in a range of diving applications, the new LifeLine spool from Apeks features easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line for low light conditions and with a super tough leader and swivel as standard, the Lifeline comes in three sizes and colours and is complemented by a range of line markers and cookies.

DL07 SERIES DRILL

The Stanley DL07 Series drill has a 1/2-inch capacity for drilling into wood, metal, or masonry.

DS4 1st STAGE DIN

Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF

SPOOL VIOLET 15 M

Inspired by technical diving and versatile enough to be used in a range of diving applications, the new LifeLine spool from Apeks features easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line for low light conditions and with a super tough leader and swivel as standard, the Lifeline comes in three sizes and colours and is complemented by a range of line markers and cookies.