OPS CORE FAST BUMP HELMET

The FAST Bump high-cut helmet is designed for less extreme environments where ballistic threats are not a priority, and the focus is on protection against blunt trauma forces, or where the primary need is for integration of mission configured components.

OPS CORE FAST CARBON HELMET

    FAST tactical helmet with super high cut, anti-shock shell made with a hybrid uni-directional composite design of the most advanced carbon and fiberglass materials. Compatible with FAST helmet accessories and headband accessories.

    S.S. BACK PLATE

    Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

    ALUMINIUM BACK PLATE

    Heavy duty and designed to work with single tanks or doubles. Our coated Aluminum plate is light weight but strong. It is perfect for people that travel or don’t need the weight of a SS plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

    DECO SMB CLOSED

    This closed bottom 3.3 foot (1 meter) surface marker is made of high visibility yellow or orange airtight nylon. Inflated orally or by use of BC low pressure inflator hose.

    SLIPSTREAM JET FIN

    An OMS favorite! Slipstream Fins are made with monoprene creating a lightweight but high performance fin. Made with a spring heel strap, Slipstream Fins give divers an easy donning fin that will also “deliver the goods” in any condition.

    JET FIN SLIPSTREAM COLOR FIN

    An OMS favorite! Slipstream Fins are made with monoprene creating a lightweight but high performance fin. Made with a spring heel strap, Slipstream Fins give divers an easy donning fin that will also “deliver the goods” in any condition.

    TACTICAL LIGHT AQUAMAX DRYSUIT

    It is a multi-purpose drysuit, especially for special defuerza use when extreme lightness and tranpirability are required and for high temperature and high humidity environments.

    WATERPROOF PACK BAGS

    Waterproof bags manufactured in a double layer construction to ensure maximum durability.The inner waterproof bag is a heavy duty rubberized fabric, which can be easily repaired. This bag is equipped with a corrugated hose included.

    SPRING HEELS

    OMS Spring Heels can be worn with most fin types. OMS Spring Heels provide divers excellent fit and comfort and make the divers fins easy to put on and take off.

    copy of WATERPROOF PACK BAGS

    Waterproof bags manufactured inWP-CONSTANT FLOAT BAG consisting of two bags: the main outer bag with the ability to adjust buoyancy in the same way as a drysuit and the inner vacuum bag to stabilize the payload and prevent movement during pitching and rolling. a double layer construction to ensure maximum durability.

    ATT-400 ACOUSTIC TARGET TRANSPONDER

    The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.

    ULB-350 LOW COST LOCATION BEACON

    This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.

    DPR-275 DIVER PINGER RECEIVER

    This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.

    PRS275 PINGER RECEIVER SYSTEM

    The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.

    BASIC DIR HARNESS

    This basic harness uses 25 feet of 2 inch nylon webbing material, 3 stainless steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily repositioned for optimal configuration with an OMS Stainless Steel buckle. A 2 inch sewn crotch strap with a 2 inch Scooter “D” ring is also included. This harness is available to be installed on a diver’s backplate or on the OMS Aluminum or Stainless Steel backplates. Divers that prefer the simplest, most utilitarian harness generally choose this configuration. Available as a Kit or installed on OMS Backplates

    TRIM WEIGHT POCKET

    Designed to be mounted on 2 inch webbing, vertically or horizontally. Can be used on nylon tank bands to augment the divers trim.

    TRIESTE WING 94 LB TWIN

    The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.