GBS RECHARGING OXYGEN SYSTEM

Siel GBS Booster Recharging Oxygen System for Military Diving: Portable Oxygen Filling System, Portable oxygen filling system represents the ideal portable base for oxygen rebreather recharging. It has been designed and produced following the best European standards and in accordance with all the safety guidelines.

OMAHA ZERO BOOT

Robust and equipped with a reinforced sole, the Omaha Zero TDS Boot is designed for use with drysuits provided with a sock-shaped foot and has a whole series of technical characteristics allowing it to perform its function perfectly.

copy of ALUMINIUM BACK PLATE

tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.

copy of S.S. BACK PLATE

Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.

FOCO SHARK LIGHT LED

The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 º. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.

DRYSUIT ROOCKBOOT

Stiff-soled boots made of 2.5 mm neoprene with double lining and polyester. For use with dry suits with socks. Insole and midsole with drainage water holes. Set by laces

220/2 320 BAR BOOSTER FULL SET

Booster Pump NRC 220/2 320 bar complete set for military diving and rebreather: The Booster 220/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: rebreather divers for loading small cylinders (2-3 liters), stage-bailout cylinders and loading mixtures in bibottles.

ALUMINIUM BACKPLATE LIGHT BLACK

TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.

CHEMICAL LIGHT

Chemical light signaling stick. Simply break internal capsule, shake and looks between 8 to 12 hours. Ideal for marking a position on land and underwater

300/2 320 BAR BOOSTER FULL SET

Booster Pump NRC 300/2 320 bar complete set for technical diving and rebreather: The Booster 300/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: Commercial divers & Diving Centers

S.S. BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

AMPHIBIAN BOOT 6.5 MM

The Amphibian diving boots are designed for a diver who wants the ultimate in support and protection. A stable footbed and hardwearing moulded outsole make this ideal for regular shore diving.

ALUMINIUM BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our coated Aluminum plate is light weight but strong. It is perfect for people that travel or don’t need the weight of a SS plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

X-TEK STAINLESS STEEL BACK PLATE

This backplate features optimized stability. Ergonomic shape for maximum comfort and eliminates back stress on extended dives. Numerous options on where to attach storage pack and additional various accessories

X-TEK ALUMINIUM BACK PLATE

The perfect travel companion. Maximum stability despite low weight. (Picture shows back plate with PURE TEK Harness and shoulder padding)

SINGLE TANK ALU ADAPTER PIECE + TANK BANDS INOX

Plate for mounting a single bottle on back plate, in polished aluminum. Includes set of two bottle straps with stainless steel buckle. Also includes a complete set of screws with spherical head, square body to avoid turning when tightening, washers and wing nuts. Approximate weight of the set 1 kg

SINGLE TANK ADAPTER PIECE

Plate to fitting single tank to back plate. Stainless steel or aluminum models. It also can be used to mount twins with double tank straps (not included). Weights: Stainless steel 0.870 kg

M8 SCREW S.S. 25 MM

Stainless steel M8 screw and 25mm long. To attach the single tank adapter to the back plate.

DIR TECHNICAL HARNESS + SHOULDER PADS

TDS DIR Harness Scuba Diving Harnais: Technical harness for mounting on back plate (not included), with all necessary components included for a basic DIR configuration. The set is sold disassembled for the diver to assemble on his plate with his personal settings and preferences.