GBS RECHARGING OXYGEN SYSTEM

Siel GBS Booster Recharging Oxygen System for Military Diving: Portable Oxygen Filling System, Portable oxygen filling system represents the ideal portable base for oxygen rebreather recharging. It has been designed and produced following the best European standards and in accordance with all the safety guidelines.

copy of ALUMINIUM BACK PLATE

tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.

METAL PRESSURE GAUGE 400 B

Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar

WAVE WATER RESCUE HELMET

The TDS Wave helmet has been specially designed for aquatic rescue. Its hydrodynamic outer shell is made of ABS and its interior is made of a high impact EVA pad.A WAVE WATER RESCUE HELMET: The Subacqua Wave helmet has been specially designed for water rescue. Its hydrodynamic outer shell is made of ABS and its interior is formed by an EVA pad, very resistant to impacts. Very compact in size and fitted to the skull, with 11 holes that allow rapid evacuation of surface water and air when we dive.

OPS CORE FAST BUMP HELMET

The FAST Bump high-cut helmet is designed for less extreme environments where ballistic threats are not a priority, and the focus is on protection against blunt trauma forces, or where the primary need is for integration of mission configured components.

copy of S.S. BACK PLATE

Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.

PRESSURE GAUGE W/HANDLE 400 B

High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.

220/2 320 BAR BOOSTER FULL SET

Booster Pump NRC 220/2 320 bar complete set for military diving and rebreather: The Booster 220/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: rebreather divers for loading small cylinders (2-3 liters), stage-bailout cylinders and loading mixtures in bibottles.

ALUMINIUM BACKPLATE LIGHT BLACK

TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.

OPS CORE FAST CARBON HELMET

    FAST tactical helmet with super high cut, anti-shock shell made with a hybrid uni-directional composite design of the most advanced carbon and fiberglass materials. Compatible with FAST helmet accessories and headband accessories.

    PY63 DIR PRESSURE GAUGE 350 B METAL

    The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.

    300/2 320 BAR BOOSTER FULL SET

    Booster Pump NRC 300/2 320 bar complete set for technical diving and rebreather: The Booster 300/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: Commercial divers & Diving Centers

    S.S. BACK PLATE

    Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

    PRESSURE GAUGE 400 B

    Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.

    NH / 3 MANTA MULTIFUNCTION HELMET

    Versatile helmCasco Northern Diver Manta NH/3: Casco multipropósito para el rescate en un alto espectro de situaciones, con 9 certificaciones disponibles. Permite una gran polivalencia en un alto espectro de situaciones debido a sus 9 certificaciones distintas. Logra así la reducción de equipo en Brigadas de Rescate con actuaciones en de muy diversa índole.et for rescue in a wide range of situations, with 9 certifications available.

    ELEV 8 HELMET

    Compact, durable and lightweight helmet certified to work at height.

    It has ten ventilation points in the helmet, protected by a mesh to prevent the ingress of dirt and allow water to pass through the helmet when used in the water.

    Available in 4 colors (red, black, yellow and black)

    ALUMINIUM BACK PLATE

    Heavy duty and designed to work with single tanks or doubles. Our coated Aluminum plate is light weight but strong. It is perfect for people that travel or don’t need the weight of a SS plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

    WTX BACK PLATE STEEL

    The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

    AIR/O2 SURFACE PRESSURE GAUGE DIN 200/300 B

    Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.