copy of ALUMINIUM BACK PLATE

tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.

copy of S.S. BACK PLATE

Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.

FOCO SHARK LIGHT LED

The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 º. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.

ALUMINIUM BACKPLATE LIGHT BLACK

TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.

7 L ALUMINIUM CYLINDER WHITE WO/ VALVE 200 B

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.

CHEMICAL LIGHT

Chemical light signaling stick. Simply break internal capsule, shake and looks between 8 to 12 hours. Ideal for marking a position on land and underwater

S.S. BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

ALUMINIUM BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our coated Aluminum plate is light weight but strong. It is perfect for people that travel or don’t need the weight of a SS plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

STEEL 12 L 232 B LONG CONCAVE SINGLE

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

20 L 232 B STEEL CYLINDER WITHOUT VALVE

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

TWIN TANK STEEL 10 L DIR

Full set of twin cylinders, DIR configured according to standards and includes the following items: 10 liters tanks in long format, working pressure 200 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

X-TEK STAINLESS STEEL BACK PLATE

This backplate features optimized stability. Ergonomic shape for maximum comfort and eliminates back stress on extended dives. Numerous options on where to attach storage pack and additional various accessories

TWIN TANK STEEL 12 L DIR

Full set of twin cylinders, DIR configured according to standards and includes the following items:12 liters tanks in long format, working pressure 232 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

X-TEK ALUMINIUM BACK PLATE

The perfect travel companion. Maximum stability despite low weight. (Picture shows back plate with PURE TEK Harness and shoulder padding)

SINGLE TANK ALU ADAPTER PIECE + TANK BANDS INOX

Plate for mounting a single bottle on back plate, in polished aluminum. Includes set of two bottle straps with stainless steel buckle. Also includes a complete set of screws with spherical head, square body to avoid turning when tightening, washers and wing nuts. Approximate weight of the set 1 kg

STEEL BOTTLE 5 L 200 Bar WITHOUT TAP

Steel helmet of the Faber brand of 5 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

SINGLE TANK ADAPTER PIECE

Plate to fitting single tank to back plate. Stainless steel or aluminum models. It also can be used to mount twins with double tank straps (not included). Weights: Stainless steel 0.870 kg