HP GAUGE HOSE 15 Cm
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.
Northern Diver Thor 1600g HD Drysuit: The Northendiver Thor 1600 drysuit is constructed from vulcanized rubber and features vulcanized laminated polymers made on a 4-way multidirectional polyester fabric that provides greater strength and durability
HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.
The TDS Norway drysuit, along with its twin the Quebec, are the range in compressed neoprene of TDS watertight suits. The Norway model, is the variant more directed towards the technical diver, which stands out for incorporating a pocket of ample dimensions and a closure in feet of sock type to be able to use with a Rock boot to taste and making the whole suit lighter, also making possible to be able to turn the suit of complete menara.
HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.
The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.
The TDS Quebec drysuit, along with its twin the Norway, are the compressed neoprene range of TDS drysuits. The Quebec model includes a boot with a very light rigid sole, a feature that makes it very appreciated even by professional and commercial divers in their work. It also has a large pocket and flexible knee pads for protection.
HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.
The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.
HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.
LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.
LP Low pressure hose with racord to attach to on low pressure inflator BPI, 55 cm length.
tds bylot abadon wetsuit 7 mm: tds bylot abadon 7 mm wetsuit, made of super elastic neoprene with sealed seams and reinforcements in high wear areas. Larrge pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.
LP Low pressure hose for regulator 60 cm length. Connecting the first stage to the second stage regulator.
Tds abadon 5 mm wetsuit, made of super elastic neoprene with sealed seams and much studied reinforcements in high wear areas. Larrge pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.