Cookie preferences
HP GAUGE HOSE 15 Cm
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
Active filters
LATEST NEWS
ECOBLENDER 1000 NITROX BLENDER
Simple Nitrox blender. The perfect solution for the private individual. The analysis of the rate of oxygen is made by connecting the OxyTester unit on the analysis base. The gas injection is made trough a manoregulator gone up the gas tank and a flow regulator which are supplied.
PRESSURE GAUGE HP HOSE 18 CM
High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.
SECUBLENDER 1000 NITROX BLENDER
Nitrox blender with electro-valve which cut the arrival of oxygen in case of stop of the compressor. The analysis of the rate of oxygen is made by connecting the OxyTester unit on the analysis base.
HP GAUGE HOSE 65 CM
HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.
HP HOSE FOR GAUGE 70 CM
HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.
PROBLENDER 1000 NITROX BLENDER
The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.
HP GAUGE HOSE 80 CM
HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.
PROBLENDER 1000 TRIMIX BLENDER
The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.
HP GAUGE HOSE 110 CM
HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.
LP INFLATOR HOSE 20 CM (Sidemount)
LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.
DIN 300 G5/8 MALE TO M26 FEMALE CONVERTER
Filling adapter form Din 300 G5/8 male to M26 female. To use in tanks with DIN valve and attach M26 Nitrox/oxygen regulators.
LP INFLATOR HOSE 55 CM
LP Low pressure hose with racord to attach to on low pressure inflator BPI, 55 cm length.
MALE DIN 200 G5/8 TO FEMALE M26 CONVERTER
For gas-filling when travelling in Europe and/or adapting a 5/8" BSP cylinder valve to accept a M26x2 first stage or compressor connector
LP REGULATOR HOSE 60 CM
LP Low pressure hose for regulator 60 cm length. Connecting the first stage to the second stage regulator.
MALE M26 TO DIN 200 G5/8 FEMALE CONVERTER
For gas-filling when travelling in Europe and/or adapting an M26x2 cylinder valve to accept a 5/8" BSP first stage, compressor connector or O2 whip
LP REGULATOR HOSE 100 CM
LP low pressure regulator hose 100 cm length. Connecting the first stage to the second stage regulator.
MALE M26 TO DIN 200 G5/8 FEMALE CONVERTER
Filling adapter from male M26 to Din 200 G5/8 female. To use in tanks with M26 valves
LP REGULATOR HOSE 150 CM
LP low pressure regulator hose 150 cm length. Connecting the first stage to the second stage regulator.
MCG 111 OXYGEN LUBE 2 OZ
Tube with oxygen compatible grease to lubricate viton O-rings or surfaces to be exposed with the gas. Necessary in all regulators in oxygen service, and essential to maintain any model of rebreather.
LP REGULATOR HOSE 210 CM
LP low pressure regulator hose 210 cm length. Connecting the 1st stage to the second. Ideal for twin cylinders type DIR configurations.
NITROX TANK DECAL
Tds nitrox identification sticker to put on bottles Nitrox tanks and make a perfect identification and distinction from other bottles. Dimensions 60 cm x 15 cm