TEK OX OXYGEN MONITORING
![](/img/m/580.jpg)
The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.
ColtriĀ 235 - 315 - 330 ETĀ Supersilent TPS ETS Commercial Diving High Pressure Compressor: Specially designed to minimize noise. It features an enhanced cooling and sound insulation system and an efficient filtering system with two Hyperfilters. Powered by an electric motor, it is equipped with four different pumping units, all in the TPS (Tropical Plus Superdry) version, and with an intuitive control panel. For longer filter life, the Tornado high pressure dryer is recommended.
Coltri 345 - 380 ETĀ Supersilent TPS ETS Scuba Diving High Pressure Compressor: Specially designed to minimize noise. It features an enhanced cooling and sound insulation system and an efficient filtering system with two Hyperfilters. Powered by an electric motor, it is equipped with four different pumping units, all in the TPS (Tropical Plus Superdry) version, and with an intuitive control panel. For longer filter life, the Tornado high pressure dryer is recommended.
The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories
The Stanley SK58 drill is a heavy duty drill, designed for underwater operations in concrete, rock and masonry drilling.The SK58 uses industry standard drilling steels and can drill up to 6m depth. The direct motor drive drives the rotation on the 1 "x 4 1/4" hex shank of the drill steel, the rotation It can be set between 0 and 300 RPM.
Coltri 450-550-650-750 ETS Silent Scuba Diving High Pressure Compressor Threephasic: The SILENT model represents excellence in soundproofing. It has been designed to meet the needs of very intensive uses and when large filling capacities are required. Equipped with 4 front filling connections for high pressure hoses (from 232 to 420 bar), a control panel and an electrical display. They are equipped with a three-phase electric motor and powerful pumping units (450 550 650 750 depending on the specific model).Ā
the Stanley hydraulic hd45 hammer drill is a heavy duty underwater model designed for drilling in concrete, rock and masonry.
Coltri 450-550-650-750 ET Open threephasic Commercial Diving High Pressure Compressor: Open meets professional needs that require large charging capacities in hot, poorly ventilated or tropical countries. It is equipped with 4 front filling connections for high pressure hoses, an intuitive control panel and an electric motor. The pumping unit, chosen from the 4 most powerful, is exposed in the rear part of the structure to ensure a better cooling cycle. For longer filter life, the Tornado high pressure dryer is recommended
Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the ParkerĀ® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.
3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO
The Stanley DL07 Series drill has a 1/2-inch capacity for drilling into wood, metal, or masonry.
The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.
3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO
The Stanley Hidraulica Submarine CO23 Circular Saw was designed for use underwater, but it is also a very useful tool on land. The CO23 uses wet or dry abrasive diamond discs, with a standard 10 inch (25.4 cm) diameter for cutting metals or concrete.
At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap
It has two gauges (one for each pressure) for controlling the load pressure. With its internal pressure regulator, you have the ability to offer dual pressure load (2 outputs and 2 outputs 300 bar to 225 bar).