345-380 ET SUPERSILENT TPS COMPRESSOR...

Coltri 345 - 380 ET Supersilent TPS ETS Scuba Diving High Pressure Compressor: Specially designed to minimize noise. It features an enhanced cooling and sound insulation system and an efficient filtering system with two Hyperfilters. Powered by an electric motor, it is equipped with four different pumping units, all in the TPS (Tropical Plus Superdry) version, and with an intuitive control panel. For longer filter life, the Tornado high pressure dryer is recommended.

PANEL CONTROL AMCOMMAND II

The Amron International Amcommand II Two Diver - Air regulation / With communication system. It is a complete self-contained portable system for two divers. This air traffic control system provides all the operations necessary to monitor and control professional diving operations.

CO23 UNDERWATER CUT-OFF SAW

The Stanley Hidraulica Submarine CO23 Circular Saw was designed for use underwater, but it is also a very useful tool on land. The CO23 uses wet or dry abrasive diamond discs, with a standard 10 inch (25.4 cm) diameter for cutting metals or concrete.

HAMMERHEAD

Versatile and easy to use high performance survey sonar

CHAIN SAW CS06

The Stanley CS06 Underwater Hydraulic Chainsaw features a 15-inch saw and today offers the diver a tool with the highest power-to-weight ratio underwater on the market today.

450-550-650-750 ET SILENT COMPRESSOR...

Coltri 450-550-650-750 ETS Silent Scuba Diving High Pressure Compressor Threephasic: The SILENT model represents excellence in soundproofing. It has been designed to meet the needs of very intensive uses and when large filling capacities are required. Equipped with 4 front filling connections for high pressure hoses (from 232 to 420 bar), a control panel and an electrical display. They are equipped with a three-phase electric motor and powerful pumping units (450 550 650 750 depending on the specific model). 

LBL S2CR

Highly accurate underwater acoustic positioning

NOVATECH FLASHERS

NOVATECH™ Beacons and Flashers are an integral component of ocean exploration and study. Flashers provide the added insurance of a visual aid with an intense flashing light to assist in recovery missions.

450-550-650-750 ET OPEN COMPRESSOR (Threephasic)

Coltri 450-550-650-750 ET Open threephasic Commercial Diving High Pressure Compressor: Open meets professional needs that require large charging capacities in hot, poorly ventilated or tropical countries. It is equipped with 4 front filling connections for high pressure hoses, an intuitive control panel and an electric motor. The pumping unit, chosen from the 4 most powerful, is exposed in the rear part of the structure to ensure a better cooling cycle. For longer filter life, the Tornado high pressure dryer is recommended

LP 250 NITROX ROTARY

Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.

NOVATECH RADIO BEACONS

The NOVATECH™ Tracking & Monitoring products allow for recovery insurance in harsh submarine environments.

PROBLENDER 1000 TRIMIX BLENDER

The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.

X-VISION HD VIDEO SYSTEM

The X-Vision CCTV System by Casco Antiguo is a compact HD video system, ideal for very commercial diving operation, it is made for the toughest and most demanding jobs. It allows to monitor and record up to 4 divers simultaneously. The brightness of the SHARK LIGHT can be adjusted on demand from the surface X-Vision Panel. 

CS11 UNDERWATER CHAIN SAW

The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.

LP 300 NITROX ROTARY

The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.

PROBLENDER 1000 NITROX BLENDER

The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.

FOCO SHARK LIGHT LED

The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 º. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.

LP 600 NITROX ROTARY

At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.

POWERCOM - MILCOM

The new line of wireless communication from OTS PowerCom and MilCom, more power, more range, and greater security.