AGA MKII FULL FACE MASK POSITIVE PRESSURE

Mask easy to install and use, silicone, facilitating its coupling and its sealing to the face of the diver. The attachment of this mask can be adjusted with a tensioner provided with 5 quick release straps. It incorporates a compensation clamp as well as a system preventing the glass from misting up

GUARDIAN FULL FACE MASK

The new range of OTS Fullface masks is the latest innovation. Designed to meet the most demanding needs of today's commercial / professional divers. Enjoy the best features designed by OTS. The colors of the mask can be combined.

SUPER RAPTOR MONO GAS HYDRAULIC PLANT

SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .

KMB 18B BANDMASK MWP

This mask has been fully tested and certified. The KMB 18B BandMask can be used in mixed gas diving as well as in shallow water diving. Incorporates the second stage of the SuperFlow 350 regulator as standard.

KMB 28B BANDMASK

KMB 28B MASK This mask has been fully tested and certified. The KMB 28B BandMask can be used in mixed gas diving, as well as in shallow water diving. Incorporates the SuperFlow 350 second stage regulator as standard.

DUAL ELECTRIC RAPTOR HYDRAULIC PLANT

SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.

HYDRAULIC PLANT NITRO GAS DUAL

SUPER RAPTOR is a hydraulic unit with gasoline engine and individual circuit, capable of providing different pressures and flow rates up to a maximum of 38 liters or a pressure of 175 Bar. It can also operate at: 30 l / min at 175 Bar or 38 l / min at 140 Bar.

M-48 MOD-1 FULL FACE MASK WITH REGULATOR

M-48 MOD-1 MASK WITH REGULATOR : The M-48 Mod-01 mask is a latest generation mask. It maintains the exclusive design of two cavities, which allows to extract the lower module when we are on the surface in order to save air. Can also be used with different communication systems.

HD13 HYDRAULIC HAMMER DRILL

13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere

M-48 SUPERMASK FULL FACE

The patented Kirby Morgan SuperMask® is a lightweight modular full face mask that allows for easy and rapid adaptation to various self contained underwater breathing apparatuses as well as surface supplied systems.

DC18 DISC SAW DOA

The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.

SPECTRUM FULL FACE MASK

With the Full Face Spectrum Mask, OTS has created the best full face mask on the market that allows divers to use their own regulators and eliminate the high costs associated with standard FFM, without sacrificing luxury.

AS23 HYDRAULIC GRINDER DOA

AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.

SURFACE SUPPLIED MOD-1 MASK

SURFACE SUPPLIED MOD-1 MASK: The Surface Supplied MOD-1 is designed for the dive team requiring a lightweight and durable commercial diving mask. An advanced MOD-1 mask model with specialized passages that allow venting the upper eye cavity is paired with a very comfortable extra stretchy 7 mm attached hood.

KV19 BREAKER DOA

KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.

BR67 UNDERWATER BREAKER/DRIVER (With C.E.)

The BR67 is a medium sized breaker in Stanley Hydraulic Tools line up of underwater paving breakers. The BR67is in the 70 lbs class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving.

BR45 HYDRAULIC BREAKER (With C.E.)

The BR45 is the smallest breaker in the Stanley Hydraulic Tool lineup of underwater breakers. The feathering on/off valve controls speed and allows easier initial tool placement. Standard 1" hex chuck and latch retainer. Painted hi‑visibility yellow.

CH15 UNDERWATER CHIPPING HAMMER

The Stanley Submarine CH15 Breaker Hammer is a lightweight yet powerful alternative to pneumatic tools. Designed for medium and heavy duty jobs, due to its high power to weight ratio the CH15 becomes the ideal tool for scuba divers working in concrete.

CO23 UNDERWATER CUT-OFF SAW

The Stanley Hidraulica Submarine CO23 Circular Saw was designed for use underwater, but it is also a very useful tool on land. The CO23 uses wet or dry abrasive diamond discs, with a standard 10 inch (25.4 cm) diameter for cutting metals or concrete.

CHAIN SAW CS06

The Stanley CS06 Underwater Hydraulic Chainsaw features a 15-inch saw and today offers the diver a tool with the highest power-to-weight ratio underwater on the market today.