List of products by brand TDS

Samsung lithium battery 18650 type, with Sanyo charger compatible with TDS Maru and DZenot lights. The charger is automatic with charge led indicator. Battery capacity: 2600 mAh, Battery voltage: 3.7V

Sanyo battery charger for 18650 Lithium-Ion batteries type, compatible with TDS Maru and DZenot lights. Incorporates a single socket to charge one battery.

tds samsung 18650 lithium battery maru dzenot: Samsung Ion-Lithium battery 18650 type, compatible with TDS Maru and DZenot lights. It is also valid for other light models that uses this type of battery. Capacity: 2600 mAh, Voltage: 3.7 V

Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve. Matt black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.

Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.

Twins valve for 18 liters long cylinders (216 mm diameter). With metric thread M 25x2 EN144. Manifold connection without isolating valve

Single valve to old tanks of 3/4 Gas (3/4 NPSM), DIN/INT connection. Hand Wheel Grip in black rubber on lef.

Tds abadon 5 mm wetsuit, made of super elastic neoprene with sealed seams and much studied reinforcements in high wear areas. Larrge pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.

Heavy duty cordura accessory holder pocket for harness or jacket, perfect for carrying small accessories and even a spare mask . Ideal to place on harness webbing, jacket and even on belts with webbing up to 50 mm.

Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.

TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.

TDS Goodman handle made of lightweight anodized aluminum. The height of the handle is adjustable by lateral screws (including a spare one), allowing it to be adjusted to the size of our hand and / or to use with or without gloves. These screws are adjusted using an allen wrench included with the handle.

tds aluminium spool reel 30 m orange line: Reel spool type made of anodized aluminium, ultraligth, with edeged edges to prevent line breakage and facilitate the line collection. Includes 30 m high visibility orange line. Stainless Steel double bolt snap trigger included.

The  TDS spools are manufactured with aeronautical anodized aluminum alloy in different colors according to the length of the rope and the spool model. Specifically designed for technical diving, incorporate special features such as the serrated edge for an optimal grip even with gloves and oversized holes for easy operation.

The  TDS spools are manufactured with aeronautical anodized aluminum alloy in different colors according to the length of the rope and the spool model. Specifically designed for technical diving, incorporate special features such as the serrated edge for an optimal grip even with gloves and oversized holes for easy operation.

TDS Goodman type handle made of lightweight anodized aluminum. The height of the handle is adjustable by means of a side screw with a wide knob, allowing it to be adjusted to the size of our hand and/or to the use with or without gloves. It is possible to adjust the height in immersion because it is not necessary to use a wrench.

Complete TDS rear mount technical diving system for Arrow 30 Tek single tank with steel backplate. Complete and ready to dive, it simply needs to be adjusted to the diver's measurements. The Arrow system in Tek version includes a steel backplate which allows to release loose ballast. The padded backplate cover pad allows the weight to be evenly distributed for maximum comfort.

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

TDS 26650 lithium battery USB-C for Kave 2000 diving light: Ion-Lithium battery 26650 USB-C type, compatible with TDS Kave 2000. It is also valid for other light models that uses this type of battery.  Voltage: 3.6 V

TDS 18650 lithium battery USB-C for Maru 1500 diving light: Ion-Lithium battery 18650 USB-C type, compatible with TDS Maru 1500. It is also valid for other light models that uses this type of battery.  Voltage: 3.6 V