Active filters
LATEST NEWS
The FAST Bump high-cut helmet is designed for less extreme environments where ballistic threats are not a priority, and the focus is on protection against blunt trauma forces, or where the primary need is for integration of mission configured components.
FAST tactical helmet with super high cut, anti-shock shell made with a hybrid uni-directional composite design of the most advanced carbon and fiberglass materials. Compatible with FAST helmet accessories and headband accessories.
The BR67 is a medium sized breaker in Stanley Hydraulic Tools line up of underwater paving breakers. The BR67is in the 70 lbs class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving.
It is a multi-purpose drysuit, especially for special defuerza use when extreme lightness and tranpirability are required and for high temperature and high humidity environments.
The BR45 is the smallest breaker in the Stanley Hydraulic Tool lineup of underwater breakers. The feathering on/off valve controls speed and allows easier initial tool placement. Standard 1" hex chuck and latch retainer. Painted hi‑visibility yellow.
The Stanley Submarine CH15 Breaker Hammer is a lightweight yet powerful alternative to pneumatic tools. Designed for medium and heavy duty jobs, due to its high power to weight ratio the CH15 becomes the ideal tool for scuba divers working in concrete.
Waterproof bags manufactured in a double layer construction to ensure maximum durability.The inner waterproof bag is a heavy duty rubberized fabric, which can be easily repaired. This bag is equipped with a corrugated hose included.
The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.
Waterproof bags manufactured inWP-CONSTANT FLOAT BAG consisting of two bags: the main outer bag with the ability to adjust buoyancy in the same way as a drysuit and the inner vacuum bag to stabilize the payload and prevent movement during pitching and rolling. a double layer construction to ensure maximum durability.
The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories
The Stanley SK58 drill is a heavy duty drill, designed for underwater operations in concrete, rock and masonry drilling.The SK58 uses industry standard drilling steels and can drill up to 6m depth. The direct motor drive drives the rotation on the 1 "x 4 1/4" hex shank of the drill steel, the rotation It can be set between 0 and 300 RPM.
the Stanley hydraulic hd45 hammer drill is a heavy duty underwater model designed for drilling in concrete, rock and masonry.
The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.
The Stanley DL07 Series drill has a 1/2-inch capacity for drilling into wood, metal, or masonry.
The Stanley Hidraulica Submarine CO23 Circular Saw was designed for use underwater, but it is also a very useful tool on land. The CO23 uses wet or dry abrasive diamond discs, with a standard 10 inch (25.4 cm) diameter for cutting metals or concrete.
This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.
This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.
The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.
Cookie preferences
