SAFE HARNESS NORTHERN DIVER
With a phenomenal overall breaking strength of 1000kg, the All New Northern Diver R-Vest has surpassed the requirements set by the ‘Association of Diving Contractors International’ Standards.
With a phenomenal overall breaking strength of 1000kg, the All New Northern Diver R-Vest has surpassed the requirements set by the ‘Association of Diving Contractors International’ Standards.
The SBQ CONTROL II panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
SUPERLITE 27 HELMET The SuperLite® 27 helmet has been tested and fulfilled the prerequisites established in Annex II of Directive 89/686 / EEC and complies with EN 250: 2000, EN 250 / A1: 2006 and EN 15333-1: 2008 (class B). Is fully CE validated with SuperFlow® 350 demand regulator and oral / nasal mask P / N 510-690 and P / N 510-747.
The Kirgby Morgan 37 helmet continues the tradition of offering the highest quality and best performance. With a new "Quad-Valve air expulsion system, which can go fitted in most previous Kirby models. Providing less expulsion resistance than the previous system in addition to including even better sealing. recommended for diving in polluted waters.
The “vest style” safety harness that distributes the load over the whole body. This harness supports the fully equipped diver safely and comfortably. With stainless steel straps and D-rings with high load capacity and bottom rings for tools or hookah closures. With 6 pockets to each accommodate 8 pounds of lead, and the ability to quickly release them.
The SBQ CONTROL III panel is a portable power system with control and monitoring for diving operations with surface air supply for three divers. The system was designed to supply air from the surface and control the depth of the divers.
BathyCorrometers are used for polarization, corrosion and interaction studies, as part of their inspection control of production and drilling platforms; submarine gas pipelines; ship hulls; breakwaters and other maritime structures.
KM 47 HELMET W / COMM The Kirby Morgan 47 helmet comes equipped with a new breathing system, inner mask and air purge system. It has demonstrated performance far superior to any other helmet on the market.
The SBQ CONTROL I panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
The MULTIGAUGE 3000 Submarino indicator is a density measuring device designed for use by a diver, for the most common applications such as density measurement underwater. This is a simple and robust manual indicator, which uses multiple echo waves, ignoring coatings and only measuring the thickness of the remaining metal
The Kirgby Morgan 77 helmet continues the tradition of offering the highest quality and best performance. The Rex® regulator is standard on this helmet. It allows it to be fitted with other Kirby Morgan regulators, in particular the Superflow® 350 or 455 balanced stainless steel regulator.
Compensation harness-vest Mark IV Jump Jucket that allows the rapid recovery of the injured person thanks to the integrated lifting harness and supplying gas if necessary.
KM 77 HELMET: The Kirby Morgan® 77 maintains the Kirby tradition by always offering the best quality coupled with superior performance. The Rex® regulator is standard on this helmet. It can be fitted with other Kirby Morgan regulators, including the Superflow® 350 or the 455 Stainless Balanced Regulator.
Cygnus' original diver-held subsea multiple-echo ultrasonic thickness meter, designed for use by divers undertaking subsea maintenance and surveys 3 decades ago… and today it is still an industry standard
The KMACS-5 is a lightweight, portable air supply, depth control and communications panel for two divers.
Divex MK2 work boots serve to improve diver safety and the life of all types of wetsuits, even in the most difficult conditions, protecting the lower extremities.
The Kirby Morgan® 37SS Helmet is the first of a generation of diving helmets that combine great durability and extraordinary performance. The frame is 1/8 "thick of mechanized molten stainless steel. This highly corrosion resistant material provides exceptional product life.
Providing an invaluable free hand while performing underwater ultrasonic thickness measurement, the Cygnus DIVE is a robust, wrist-mountable ultrasonic underwater thickness meter with a large, bright display with live A-scan making it easily viewable by both the diver and camera - even in the poorest visibility.
KM 97 W / MWP HELMET The Kirby Morgan® 97 helmet has a 455 compensated regulator. The 455 compensated regulator is made completely of stainless steel and offers virtually the same breathing performance as the REX regulator.