HP GAUGE HOSE 15 Cm
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar
SUPERLITE 27 HELMET The SuperLite® 27 helmet has been tested and fulfilled the prerequisites established in Annex II of Directive 89/686 / EEC and complies with EN 250: 2000, EN 250 / A1: 2006 and EN 15333-1: 2008 (class B). Is fully CE validated with SuperFlow® 350 demand regulator and oral / nasal mask P / N 510-690 and P / N 510-747.
High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.
High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.
The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 º. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.
KM 47 HELMET W / COMM The Kirby Morgan 47 helmet comes equipped with a new breathing system, inner mask and air purge system. It has demonstrated performance far superior to any other helmet on the market.
HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.
The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.
The Kirgby Morgan 77 helmet continues the tradition of offering the highest quality and best performance. The Rex® regulator is standard on this helmet. It allows it to be fitted with other Kirby Morgan regulators, in particular the Superflow® 350 or 455 balanced stainless steel regulator.
HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.
Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.
KM 77 HELMET: The Kirby Morgan® 77 maintains the Kirby tradition by always offering the best quality coupled with superior performance. The Rex® regulator is standard on this helmet. It can be fitted with other Kirby Morgan regulators, including the Superflow® 350 or the 455 Stainless Balanced Regulator.
HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.
The Kirby Morgan® 37SS Helmet is the first of a generation of diving helmets that combine great durability and extraordinary performance. The frame is 1/8 "thick of mechanized molten stainless steel. This highly corrosion resistant material provides exceptional product life.
HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.
KM 97 W / MWP HELMET The Kirby Morgan® 97 helmet has a 455 compensated regulator. The 455 compensated regulator is made completely of stainless steel and offers virtually the same breathing performance as the REX regulator.
Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.
The Divex AH5 is the successor to the Divex AH3 and AH4, the helmets which have been chosen by most professional divers as standards of safety, quality, performance and reliability.
LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.
LP Low pressure hose with racord to attach to on low pressure inflator BPI, 55 cm length.