METAL PRESSURE GAUGE 400 B

Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar

SUPER LITE 27 HELMET

SUPERLITE 27 HELMET The SuperLite® 27 helmet has been tested and fulfilled the prerequisites established in Annex II of Directive 89/686 / EEC and complies with EN 250: 2000, EN 250 / A1: 2006 and EN 15333-1: 2008 (class B). Is fully CE validated with SuperFlow® 350 demand regulator and oral / nasal mask P / N 510-690 and P / N 510-747.

WAVE WATER RESCUE HELMET

The TDS Wave helmet has been specially designed for aquatic rescue. Its hydrodynamic outer shell is made of ABS and its interior is made of a high impact EVA pad.A WAVE WATER RESCUE HELMET: The Subacqua Wave helmet has been specially designed for water rescue. Its hydrodynamic outer shell is made of ABS and its interior is formed by an EVA pad, very resistant to impacts. Very compact in size and fitted to the skull, with 11 holes that allow rapid evacuation of surface water and air when we dive.

OPS CORE FAST BUMP HELMET

The FAST Bump high-cut helmet is designed for less extreme environments where ballistic threats are not a priority, and the focus is on protection against blunt trauma forces, or where the primary need is for integration of mission configured components.

PRESSURE GAUGE W/HANDLE 400 B

High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.

KM 47 W/MWP HELMET

KM 47 HELMET W / COMM The Kirby Morgan 47 helmet comes equipped with a new breathing system, inner mask and air purge system. It has demonstrated performance far superior to any other helmet on the market.

OPS CORE FAST CARBON HELMET

    FAST tactical helmet with super high cut, anti-shock shell made with a hybrid uni-directional composite design of the most advanced carbon and fiberglass materials. Compatible with FAST helmet accessories and headband accessories.

    PY63 DIR PRESSURE GAUGE 350 B METAL

    The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.

    KM 77 W/MWP HELMET

    The Kirgby Morgan 77 helmet continues the tradition of offering the highest quality and best performance. The Rex® regulator is standard on this helmet. It allows it to be fitted with other Kirby Morgan regulators, in particular the Superflow® 350 or 455 balanced stainless steel regulator.

    PVC DRY GOLVES LATEX SEAL

    sitech pvc dry gloves latex seals: A seamless glove made of PVC and latex, with a bottleneck seal. A durable and cost effective Dry Glove. Easy to use. These gloves make diving both comfortable and warm, and therefore makes it possible to keep the dexterity in the hands much better. These gloves comes with a separate acrylic liner which provides warmth and comfort to your hands.

    PRESSURE GAUGE 400 B

    Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.

    NH / 3 MANTA MULTIFUNCTION HELMET

    Versatile helmCasco Northern Diver Manta NH/3: Casco multipropósito para el rescate en un alto espectro de situaciones, con 9 certificaciones disponibles. Permite una gran polivalencia en un alto espectro de situaciones debido a sus 9 certificaciones distintas. Logra así la reducción de equipo en Brigadas de Rescate con actuaciones en de muy diversa índole.et for rescue in a wide range of situations, with 9 certifications available.

    KM 77 HELMET

    KM 77 HELMET: The Kirby Morgan® 77 maintains the Kirby tradition by always offering the best quality coupled with superior performance. The Rex® regulator is standard on this helmet. It can be fitted with other Kirby Morgan regulators, including the Superflow® 350 or the 455 Stainless Balanced Regulator.

    FLEX GLOVE 2 MM

    Super flexible 2 mm thick neoprene glove with inner and outer lycra lining and non-slip reinforced palm.

    ELEV 8 HELMET

    Compact, durable and lightweight helmet certified to work at height.

    It has ten ventilation points in the helmet, protected by a mesh to prevent the ingress of dirt and allow water to pass through the helmet when used in the water.

    Available in 4 colors (red, black, yellow and black)

    KM 37SS STAINLESS STEEL W/MWP HELMET

    The Kirby Morgan® 37SS Helmet is the first of a generation of diving helmets that combine great durability and extraordinary performance. The frame is 1/8 "thick of mechanized molten stainless steel. This highly corrosion resistant material provides exceptional product life.

    GLOVE LINER GLOVE 5 MM

    The 5mm gloves offer the warmth and comfort comparable only to thicker traditional gloves. Features include: stretch neoprene for fit and comfort, and a Thermoflex lining for warmth, sealed seams to minimise water ingress, easy donning minimalist design, and a carbonite finish for grip and durability.

    KM 97 W/MWP HELMET

    KM 97 W / MWP HELMET The Kirby Morgan® 97 helmet has a 455 compensated regulator. The 455 compensated regulator is made completely of stainless steel and offers virtually the same breathing performance as the REX regulator.

    AIR/O2 SURFACE PRESSURE GAUGE DIN 200/300 B

    Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.

    GLOVE LINER GLOVE 3 MM

    The 3mm gloves provide amazing warmth during a dive. The 3mm gloves give outstanding dexterity – ideal for photography and videography