copy of ALUMINIUM BACK PLATE

tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.

HP GAUGE HOSE 15 Cm

High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.

SUPER LITE 27 HELMET

SUPERLITE 27 HELMET The SuperLite® 27 helmet has been tested and fulfilled the prerequisites established in Annex II of Directive 89/686 / EEC and complies with EN 250: 2000, EN 250 / A1: 2006 and EN 15333-1: 2008 (class B). Is fully CE validated with SuperFlow® 350 demand regulator and oral / nasal mask P / N 510-690 and P / N 510-747.

copy of S.S. BACK PLATE

Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.

PRESSURE GAUGE HP HOSE 18 CM

High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.

KM 47 W/MWP HELMET

KM 47 HELMET W / COMM The Kirby Morgan 47 helmet comes equipped with a new breathing system, inner mask and air purge system. It has demonstrated performance far superior to any other helmet on the market.

ALUMINIUM BACKPLATE LIGHT BLACK

TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.

HP GAUGE HOSE 65 CM

HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.

KM 77 W/MWP HELMET

The Kirgby Morgan 77 helmet continues the tradition of offering the highest quality and best performance. The Rex® regulator is standard on this helmet. It allows it to be fitted with other Kirby Morgan regulators, in particular the Superflow® 350 or 455 balanced stainless steel regulator.

HP HOSE FOR GAUGE 70 CM

HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.

S.S. BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

KM 77 HELMET

KM 77 HELMET: The Kirby Morgan® 77 maintains the Kirby tradition by always offering the best quality coupled with superior performance. The Rex® regulator is standard on this helmet. It can be fitted with other Kirby Morgan regulators, including the Superflow® 350 or the 455 Stainless Balanced Regulator.

HP GAUGE HOSE 80 CM

HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.

ALUMINIUM BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our coated Aluminum plate is light weight but strong. It is perfect for people that travel or don’t need the weight of a SS plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

KM 37SS STAINLESS STEEL W/MWP HELMET

The Kirby Morgan® 37SS Helmet is the first of a generation of diving helmets that combine great durability and extraordinary performance. The frame is 1/8 "thick of mechanized molten stainless steel. This highly corrosion resistant material provides exceptional product life.

HP GAUGE HOSE 110 CM

HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

KM 97 W/MWP HELMET

KM 97 W / MWP HELMET The Kirby Morgan® 97 helmet has a 455 compensated regulator. The 455 compensated regulator is made completely of stainless steel and offers virtually the same breathing performance as the REX regulator.

AH5 FREE FLOW HELMET

The Divex AH5 is the successor to the Divex AH3 and AH4, the helmets which have been chosen by most professional divers as standards of safety, quality, performance and reliability.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

X-TEK STAINLESS STEEL BACK PLATE

This backplate features optimized stability. Ergonomic shape for maximum comfort and eliminates back stress on extended dives. Numerous options on where to attach storage pack and additional various accessories

KMB 18B BANDMASK MWP

This mask has been fully tested and certified. The KMB 18B BandMask can be used in mixed gas diving as well as in shallow water diving. Incorporates the second stage of the SuperFlow 350 regulator as standard.