SUPER LITE 27 HELMET

SUPERLITE 27 HELMET The SuperLite® 27 helmet has been tested and fulfilled the prerequisites established in Annex II of Directive 89/686 / EEC and complies with EN 250: 2000, EN 250 / A1: 2006 and EN 15333-1: 2008 (class B). Is fully CE validated with SuperFlow® 350 demand regulator and oral / nasal mask P / N 510-690 and P / N 510-747.

KM 47 W/MWP HELMET

KM 47 HELMET W / COMM The Kirby Morgan 47 helmet comes equipped with a new breathing system, inner mask and air purge system. It has demonstrated performance far superior to any other helmet on the market.

AUV A18S

A18-S is the 3D image sonar configuration of the A18 autonomous underwater vehicle of the ECA Group. This AUV is designed to develop precision 3D inspections of the seabed. It is deployed from a surface vessel and an LARS allowing automatic recovery can be used. The vehicle operates autonomously at depths of 300 meters with 21 hours of battery life and is easy to transport by plane.

KM 77 W/MWP HELMET

The Kirgby Morgan 77 helmet continues the tradition of offering the highest quality and best performance. The Rex® regulator is standard on this helmet. It allows it to be fitted with other Kirby Morgan regulators, in particular the Superflow® 350 or 455 balanced stainless steel regulator.

AUV ECA A-9S

A9-S is the portable configuration of the A9 autonomous underwater vehicle

S.S. BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

KM 77 HELMET

KM 77 HELMET: The Kirby Morgan® 77 maintains the Kirby tradition by always offering the best quality coupled with superior performance. The Rex® regulator is standard on this helmet. It can be fitted with other Kirby Morgan regulators, including the Superflow® 350 or the 455 Stainless Balanced Regulator.

ALUMINIUM BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our coated Aluminum plate is light weight but strong. It is perfect for people that travel or don’t need the weight of a SS plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

KM 37SS STAINLESS STEEL W/MWP HELMET

The Kirby Morgan® 37SS Helmet is the first of a generation of diving helmets that combine great durability and extraordinary performance. The frame is 1/8 "thick of mechanized molten stainless steel. This highly corrosion resistant material provides exceptional product life.

AUV A18D

A18-D is the mid-size autonomous underwater vehicle of the ECA, AUV group for deep water applications. It is dedicated to the precise exploration of the seabed in 3D. It performs autonomous missions from a depth of  3000 m for up to  21 hours and is easy to transport by plane for missions abroad. This system can be delivered with an LARS which enables automatic underwater recovery and Triton Imaging software applications for further data processing.

DECO SMB CLOSED

This closed bottom 3.3 foot (1 meter) surface marker is made of high visibility yellow or orange airtight nylon. Inflated orally or by use of BC low pressure inflator hose.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

KM 97 W/MWP HELMET

KM 97 W / MWP HELMET The Kirby Morgan® 97 helmet has a 455 compensated regulator. The 455 compensated regulator is made completely of stainless steel and offers virtually the same breathing performance as the REX regulator.

AUV ECA A-9E

A9-E is the configuration of the autonomous autonomous vehicle A9 of the ECA group, AUV, for environmental monitoring. In addition to acquiring images of the seabed, it will record bathymetric data as well as environmental information such as water turbidity, conductivity, temperature, fluorescence, dissolved oxygen or pH. Mission planning and tracking is done through user-friendly software that lets you track the vehicle at all times during your mission.

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

KMB 18B BANDMASK MWP

This mask has been fully tested and certified. The KMB 18B BandMask can be used in mixed gas diving as well as in shallow water diving. Incorporates the second stage of the SuperFlow 350 regulator as standard.

SLIPSTREAM JET FIN

An OMS favorite! Slipstream Fins are made with monoprene creating a lightweight but high performance fin. Made with a spring heel strap, Slipstream Fins give divers an easy donning fin that will also “deliver the goods” in any condition.

JET FIN SLIPSTREAM COLOR FIN

An OMS favorite! Slipstream Fins are made with monoprene creating a lightweight but high performance fin. Made with a spring heel strap, Slipstream Fins give divers an easy donning fin that will also “deliver the goods” in any condition.

KMB 28B BANDMASK

KMB 28B MASK This mask has been fully tested and certified. The KMB 28B BandMask can be used in mixed gas diving, as well as in shallow water diving. Incorporates the SuperFlow 350 second stage regulator as standard.

M-48 MOD-1 FULL FACE MASK WITH REGULATOR

M-48 MOD-1 MASK WITH REGULATOR : The M-48 Mod-01 mask is a latest generation mask. It maintains the exclusive design of two cavities, which allows to extract the lower module when we are on the surface in order to save air. Can also be used with different communication systems.