SUPER LITE 27 HELMET

SUPERLITE 27 HELMET The SuperLite® 27 helmet has been tested and fulfilled the prerequisites established in Annex II of Directive 89/686 / EEC and complies with EN 250: 2000, EN 250 / A1: 2006 and EN 15333-1: 2008 (class B). Is fully CE validated with SuperFlow® 350 demand regulator and oral / nasal mask P / N 510-690 and P / N 510-747.

KM 47 W/MWP HELMET

KM 47 HELMET W / COMM The Kirby Morgan 47 helmet comes equipped with a new breathing system, inner mask and air purge system. It has demonstrated performance far superior to any other helmet on the market.

KM 77 W/MWP HELMET

The Kirgby Morgan 77 helmet continues the tradition of offering the highest quality and best performance. The Rex® regulator is standard on this helmet. It allows it to be fitted with other Kirby Morgan regulators, in particular the Superflow® 350 or 455 balanced stainless steel regulator.

KM 77 HELMET

KM 77 HELMET: The Kirby Morgan® 77 maintains the Kirby tradition by always offering the best quality coupled with superior performance. The Rex® regulator is standard on this helmet. It can be fitted with other Kirby Morgan regulators, including the Superflow® 350 or the 455 Stainless Balanced Regulator.

KM 37SS STAINLESS STEEL W/MWP HELMET

The Kirby Morgan® 37SS Helmet is the first of a generation of diving helmets that combine great durability and extraordinary performance. The frame is 1/8 "thick of mechanized molten stainless steel. This highly corrosion resistant material provides exceptional product life.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

KM 97 W/MWP HELMET

KM 97 W / MWP HELMET The Kirby Morgan® 97 helmet has a 455 compensated regulator. The 455 compensated regulator is made completely of stainless steel and offers virtually the same breathing performance as the REX regulator.

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

KMB 18B BANDMASK MWP

This mask has been fully tested and certified. The KMB 18B BandMask can be used in mixed gas diving as well as in shallow water diving. Incorporates the second stage of the SuperFlow 350 regulator as standard.

KMB 28B BANDMASK

KMB 28B MASK This mask has been fully tested and certified. The KMB 28B BandMask can be used in mixed gas diving, as well as in shallow water diving. Incorporates the SuperFlow 350 second stage regulator as standard.

M-48 MOD-1 FULL FACE MASK WITH REGULATOR

M-48 MOD-1 MASK WITH REGULATOR : The M-48 Mod-01 mask is a latest generation mask. It maintains the exclusive design of two cavities, which allows to extract the lower module when we are on the surface in order to save air. Can also be used with different communication systems.

KM 37 HELMET

The Kirgby Morgan 37 helmet continues the tradition of offering the highest quality and best performance. With a new "Quad-Valve air expulsion system, which can go fitted in most previous Kirby models. Providing less expulsion resistance than the previous system in addition to including even better sealing. recommended for diving in polluted waters.

SURFACE SUPPLIED MOD-1 MASK

SURFACE SUPPLIED MOD-1 MASK: The Surface Supplied MOD-1 is designed for the dive team requiring a lightweight and durable commercial diving mask. An advanced MOD-1 mask model with specialized passages that allow venting the upper eye cavity is paired with a very comfortable extra stretchy 7 mm attached hood.

SPOOL BLUE 45 M

Inspired by technical diving and versatile enough to be used in a range of diving applications, the new LifeLine spool from Apeks features easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line for low light conditions and with a super tough leader and swivel as standard, the Lifeline comes in three sizes and colours and is complemented by a range of line markers and cookies.

SPOOL GREEN 30 M

Inspired by technical diving and versatile enough to be used in a range of diving applications, the new LifeLine spool from Apeks features easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line for low light conditions and with a super tough leader and swivel as standard, the Lifeline comes in three sizes and colours and is complemented by a range of line markers and cookies.

DS4 1st STAGE DIN

Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF

SPOOL VIOLET 15 M

Inspired by technical diving and versatile enough to be used in a range of diving applications, the new LifeLine spool from Apeks features easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line for low light conditions and with a super tough leader and swivel as standard, the Lifeline comes in three sizes and colours and is complemented by a range of line markers and cookies.

SIDEMOUNT REGULATOR KIT

As the popularity of sidemount diving continues to grow around the world, Apeks delivers a regulator kit that contains all of the necessary hardware and accessories to complete your breathing set-up, including two award-winning XTX50 regulators.